MPN: TL2102
NSN : 5120-01-187-5486
CAGE Code : 24235
Manufacturer: Williams International Co L L C
Item Name : Puller Mechanical
24235 Puller Mechanical 5120 Hand Tools Nonedged Nonpowered Limitless Purchasing is your sourcing solution for all of your NSN part needs like TL2102, offering rapid lead-times and competitive pricing on everything that we carry. Manufactured by Williams International Co L L C, this Puller Mechanical component is listed alongside the NSN part number TL2102 for your ease of procurement. With current availability for this NSN part on our website, we invite you to begin the purchasing process by filling out the RFQ form as provided below. Once received by our team members, a dedicated account manager will review and respond in 15 minutes or less with a personalized quote that accommodates your individual needs and requirements.
NSN parts are those that follow the National Stock Number system as dictated by the United Nations, allowing for easier identification, supply, and procurement of standardized materials. As a leading distributor of NSN parts, we can help customers source the new, used, and obsolete components that they need from top global NSN parts manufacturers such as Williams International Co L L C. If you are facing an Aircraft on Ground (AOG) situation, we also offer same-day and expedited shipping for a number of items that we carry. With over 2 billion items at your disposal, Limitless Purchasing can serve as your strategic sourcing partner for all of your operational needs. Get started on the purchasing process for NSN 5120011875486 and other parts such as TL2102 that you have been searching for today and see what we can do for you!
MRC | Criteria | Characteristic |
---|---|---|
SR-5 | MANUFACTURERS CODE | 24235 |
FEAT | SPECIAL FEATURES | ITEM IS USED DURING DEPOT LEVEL MAINTENANCE TO REMOVE THE AXIAL ASSY FROM THE L.P.SHAFT; WILL BE USED WITH THE SWING TABLE AND SHAFT ADAPTER; IS A CIRCULAR METAL PLATE WITH RAISED EDGE TO ACCOMODATE THE LOWER EDGE OF THE COMMPRESSOR CASE W/A RAISED, RUBBVER COVERED CENTERING RING; THE RING HAS A HOLE IN THE CENTER TO ACCEPT THE SHAFT; THE AXIAL IS PLACED IN THE FIXTURE AND SEPARATED FROM THE SHAFT BY STRIKING ADAPTER AND THEN REMOVED |
SR-5 | DESIGN CONTROL REFERENCE | TL2102 |
CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | FIXTURE SHAFT REMOVAL |
SR-5 | THE MANUFACTURERS DATA |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote